Home
Contact
Fire Protection

Mica Tapes

Insulation for fire-resistant cables with circuit integrity up to 1000 °C

Up to 1000 °C Service temperature
Muscovite / Phlogopite Mica types
Up to 3.2 kV/layer Dielectric strength
Halogen-free Composition
Product

Mica Tapes

Mica tapes are composite materials made of high-purity mica paper bonded to an alkali-free glass-fibre fabric backing and impregnated with a high thermal-resistance silicone resin. This construction provides a protective barrier that preserves electrical insulation integrity during fire exposure, keeping the cable functional at temperatures up to 1000 °C depending on the mica grade selected.

Bobinas de cinta de mica OR64 apiladas en fábrica
In application

All our mica tapes are halogen-free and produce no toxic gases, complying with the low-smoke requirements demanded in installations where personal safety is paramount. Tensile strength ≥100 N/10 mm guarantees breakage-free taping even at high speed, supporting elevated productivity in automated cable lines.

We manufacture in two grades depending on the taping process: standard grade for general applications, and high-quality grade for high-speed taping and small conductor sections where material handling is more demanding.

Selection guide

How to choose the right one?

The choice between muscovite and phlogopite depends primarily on the test temperature specified in the applicable standard and on the characteristics of the taping process. Phlogopite withstands higher temperatures at the most competitive cost, while muscovite offers better adaptability during taping for tests up to 950 °C.

Muscovite vs. Phlogopite

Factor Muscovite Mica Phlogopite Mica
Maximum temperature 750–950 °C Up to 1000 °C
Dielectric strength Higher (1.3 kV/layer) 1.0–1.5 kV/layer depending on ref.
Adaptability during taping Higher Standard
Relative cost Higher Lower
When to choose Tests up to 950 °C, when adaptability is the priority Standards with tests at 1000 °C, long exposure times, best cost

Selection by standard

Standard Test temperature Recommended mica
IEC 60331 750 °C–950 °C Muscovite or Phlogopite
EN 50200 830 °C–950 °C Muscovite or Phlogopite
BS 6387 Cat. C 950 °C Muscovite or Phlogopite
BS 6387 Cat. W 650 °C + water Phlogopite (greater resistance)
EN 45545 (railway) Variable by HL Per specific requirement
Mica tape range

A different mica for every application

Download the technical data sheet for each range, or ask us which reference best suits your cable.

Standard

Standard phlogopite

High-temperature mica at the best cost: the most competitive choice for fire-resistant cables.

  • Fire grade up to 1000 °C
  • The most cost-competitive option
  • High-speed taping without risk of yarning
FR90P28i
Thickness
0.100 ±0.02 mm
Mica
90 ±5 g/m²
Breakdown voltage
1.0 kV/layer
FR120P28i
Thickness
0.120 ±0.02 mm
Mica
125 ±5 g/m²
Breakdown voltage
1.2 kV/layer
Standard

Standard muscovite

Calcined muscovite for those who need the best adaptability to the conductor during taping.

  • Better adaptability during taping
  • Fire grade 750 - 950 °C
  • Higher cost than phlogopite
FR80M28i
Thickness
0.110 ±0.02 mm
Mica
80 ±5 g/m²
Breakdown voltage
1.3 kV/layer
High quality

Our high-quality tapes (HQ)

In both qualities, OR64 has developed with its partner an improved mica tape for high-speed taping and excellent adaptability, especially on smaller conductor sections. Available in phlogopite and muscovite versions.

  • Phlogopite: fire grade up to 1000 °C
  • Muscovite: fire grade 750 - 950 °C
FR90P24-HQ
Thickness
0.100 ±0.02 mm
Mica
90 ±5 g/m²
Breakdown voltage
1 kV/layer
FR120P24-HQ
Thickness
0.120 ±0.02 mm
Mica
125 ±5 g/m²
Breakdown voltage
1.2 kV/layer
FR80M24-HQ
Thickness
0.110 ±0.02 mm
Mica
80 ±5 g/m²
Breakdown voltage
1.3 kV/layer
Premium range

+ULTRA-FR, the non plus ultra mica tape

Three-layer mica tape: high-purity phlogopite mica paper, an improved alkali-free glass cloth and an inorganic reinforcement layer.

  • Improved fire behaviour, up to 1000 °C
  • Improved voltage resistance: 3 - 3.2 kV/layer
  • Better finish of taped cables and improved extrusion
  • Ultra-high-speed taping, no yarning
+ULTRA-FR-90P
Thickness
0.12 ±0.02 mm
Mica
90 ±3 g/m²
Breakdown voltage
3 kV/layer
+ULTRA-FR-120P
Thickness
0.140 ±0.02 mm
Mica
120 ±4 g/m²
Breakdown voltage
3.2 kV/layer

Tensile strength 100 N/10 mm on all references. Specifications subject to change.

Supply

Delivery formats

The supply format directly influences process continuity and taping efficiency. Material can be supplied in different formats and dimensions adapted to each machine type and production speed.

Pad / Roll (pancake)
OD
Outer diameter
ID
Core inner diameter
Core
Plastic or cardboard core

Pad / Roll (pancake)

Pancake format for taping lines

Core ID 76 mm (3″), 120 mm (others on request)
Max OD 80 – 600 mm
Width range 5 – 1000 mm
Core material Plastic or cardboard
Spool (TWS / STS reel)
A
Traverse width
B
Core length
C
Outer diameter (OD)

Spool (TWS / STS reel)

Reel for automatic taping lines

Core ID 76 mm (3″)
Max OD up to 300 mm
Max width up to 300 mm
Min tape width from 4 mm
Winding type Traverse Wound (TWS) or Step to Step (STS)
Core material Plastic or cardboard

Other formats and dimensions available on request. Custom slitting service available. +ULTRA-FR: pads from 6 mm width (standard OD 300–400 mm) and spools from 5 mm.

Value added

Need technical advice?

Our technical team is available to help you select the optimum material for your application. With 29 years of experience in mica materials for the cable industry, we offer technical assistance for new and existing projects.

We process material from our stock or material supplied by the customer. We also offer mica taping of conductors for manufacturers of fire-resistant cables.

Need
technical advice?

Our technical team is available to help you select the optimal material for your application.