Home
Contact

Slitting Service

Custom slitting of technical cable tapes up to 1200 mm width

1200 mm Maximum input roll width
± 0.50 mm Width tolerance (aluminium)
Services

Precision cutting with state-of-the-art machinery

Custom slitting adjusts tape width to exact cable manufacturing line specifications, eliminating waste and ensuring compatibility with taping machine feed systems. We process both materials from our stock and customer-supplied rolls, maintaining full traceability from the original batch.

New OR64 slitting machine
New state-of-the-art slitting machine We have incorporated a state-of-the-art slitting machine with digital tension control and automatic blade positioning, achieving tolerances of ±0.50 mm on all types of materials.

The cutting process

Jumbo roll on the slitting machine
01

Jumbo roll loading

The master coil (jumbo) is mounted on the unwinding shaft. The blades are set according to the cutting programme requested by the customer.

Tapes being cut on a slitting machine
02

Cutting and separation

The material passes through circular cutting blades, which divide the coil into tapes of the exact specified width, with controlled tolerance.

Pads cut to size
03

Rewinding into pads

The cut tapes are rewound in pad format on plastic or cardboard cores, ready for use in cable manufacturing lines.

Slitting capacity

1200 mm Maximum input roll width
± 0.50 mm Width tolerance (aluminium) ALU107004.2021

Slitting ranges by material

Material Min. width Max. width Pad format Spool format
PET film 3.5 mm 1000 mm 5-1000 mm 3.5-80 mm
Aluminium-Polyester (AL/PET) 3.5 mm 1000 mm 5-1000 mm 3.5-40 mm
Non-Woven Polyester (NWP) 10 mm 1000 mm 10-1000 mm 10-100 mm
Mica Tapes 4 mm 1000 mm 5-1000 mm from 4 mm
Aluminium-Copolymer 20 mm 510 mm — —
Pure Aluminium 1070A 26 mm 500 mm — —
Water-Blocking 10 mm Jumbo 10+ mm 10-40 mm

Delivery formats

01

Pad / Pancake

When to choose this format?

Pancake format maximises footage per roll. Used in longitudinal taping where tape is applied parallel to cable axis. The taping machine unwinds from the pad centre, so inner diameter (ID) must match machine mandrel. Incorrect ID prevents mounting; excessive OD may not fit the roll holder.

02

Traverse Wound Spool (TWS)

Cross-wound

When to choose this format?

Cross-wound unwinding delivers tape without residual twist. Used in helical taping where tape is applied in a spiral around the conductor or cable core. Feed is from the spool side. If a pad were used in helical taping, the tape would accumulate one twist turn per roll turn, causing wrinkles and taping defects.

03

Step to Step Spool (STS)

Step-to-step wound

When to choose this format?

Parallel layer winding maintains uniform tension throughout unwinding. Indicated when tension variation affects the process, such as with very thin tapes or applications where taping pressure is critical for cable performance.

Format conversion

We convert pad-format rolls to spool format (TWS or STS) when the taping line requires a different format than originally supplied. Available for stock materials or customer-supplied material.

Pad Pancake
Spool TWS / STS

Packaging

Rolls packed and palletised with OR64 seal

Eye to Sky

Rolls vertical, eye facing up. Easy forklift extraction.

Flat Eye

Rolls horizontal, eye sideways. Optimises pallet height.

Protection

Foam + shrink-wrapped

Palletising

Wooden pallets

Need custom slitting?

Tell us material, slitting width, format (pad/spool), core diameter and quantity. We process both our stock and your own material.